netcdf ocean-time-series/Stellwagen/STRESS/3638ATT-1A.cdf {
  dimensions:
    time = 37992;
    depth = 1;
    lat = 1;
    lon = 1;
  variables:
    int time(time=37992);
      :FORTRAN_format = "F10.2";
      :units = "True Julian Day";
      :type = "EVEN";
      :epic_code = 624; // int

    int time2(time=37992);
      :FORTRAN_format = "F10.2";
      :units = "msec since 0:00 GMT";
      :type = "EVEN";
      :epic_code = 624; // int

    float depth(depth=1);
      :FORTRAN_format = "F10.2";
      :units = "m";
      :type = "EVEN";
      :epic_code = 3; // int

    float lat(lat=1);
      :FORTRAN_format = "F10.2";
      :units = "degrees_north";
      :type = "EVEN";
      :epic_code = 500; // int

    float lon(lon=1);
      :FORTRAN_format = "F10.2";
      :units = "degrees_east";
      :type = "EVEN";
      :epic_code = 502; // int

    float T_20(time=37992, depth=1, lat=1, lon=1);
      :name = "T";
      :long_name = "TEMPERATURE (C)          ";
      :generic_name = "temp";
      :FORTRAN_format = "f10.2";
      :units = "C";
      :epic_code = 20; // int
      :code = "R";
      :sensor_depth = 80.0f; // float
      :serial_number = "V-516";
      :minimum = 8.79305f; // float
      :maximum = 11.17f; // float
      :valid_range = 0.0f, 100.0f; // float

    float upr_4001(time=37992, depth=1, lat=1, lon=1);
      :name = "upr";
      :long_name = "UPPER ROTOR SPEED     ";
      :generic_name = "rotor";
      :FORTRAN_format = "f10.3";
      :units = "cm/s";
      :epic_code = 4001; // int
      :code = "R";
      :sensor_depth = 80.0f; // float
      :serial_number = "V-516";
      :minimum = 2.32089f; // float
      :maximum = 44.0664f; // float
      :valid_range = 0.0f, 1000.0f; // float

    float ATTN_55(time=37992, depth=1, lat=1, lon=1);
      :name = "ATTN";
      :long_name = "ATTENUATION             ";
      :generic_name = "attn";
      :FORTRAN_format = "f7.5";
      :units = "m-1";
      :epic_code = 55; // int
      :code = "R";
      :sensor_depth = 80.0f; // float
      :serial_number = "";
      :minimum = 0.20774f; // float
      :maximum = 10.4189f; // float
      :valid_range = 0.0f, 10000.0f; // float

  // global attributes:
  :CREATION_DATE = "09:54 25-APR-97";
  :INST_TYPE = "V-516 ";
  :DATA_TYPE = "TIME";
  :DATA_SUBTYPE = "";
  :DATA_ORIGIN = "USGS/WHFC";
  :COORD_SYSTEM = "GEOGRAPHICAL";
  :WATER_MASS = "?";
  :EXPERIMENT = "?";
  :PROJECT = "?";
  :MOORING = "3638";
  :DELTA_T = "3.75 minutes\r\n";
  :COMPOSITE = 0; // int
  :DATA_CMNT = "  STRESS C3  V0=VMAX=4.781  .95* V(AIR) = 4.545\r\n";
  :POS_CONST = 0; // int
  :DEPTH_CONST = 0; // int
  :WATER_DEPTH = 90; // int
  :DESCRIPT = "?";
  :DRIFTER = 0; // int
  :VAR_DESC = "u v   ";
  :FILL_FLAG = 0; // int
  :VAR_FILL = "";
  :magnetic_variation(deg) = 16.0f; // float
  :title = "Current meter archive data - Butman et al, Oct.  1992";
  :start_time = "20-Nov-1990 21:31:52";
  :stop_time = "27-Feb-1991 19:58:07";
  :cycles = 37992; // int
  :days = 98; // int
  :latitude = 38.639557f; // float
  :longitude = -123.480446f; // float
  :history = "Original file creation date was 15:46 MAY  2,\'91\r\nConverted to EPIC/NetCDF Fri Dec  6 17:19:01 1996\n\nOriginal ascii file was a3638a01.ascChanged epic code 20 to 20 on Thu Apr 24 18:22:02 1997\nChanged epic code 4020 to 4001 on Thu Apr 24 18:22:02 1997\n";
  :summary = "3638ATT-1A     start time = 20 Nov 1990  21:31:52  cycles = 37992\n               stop  time = 27 Feb 1991  19:58:07  # days = 98\nExpt. = \'USGS\'  sampling interval = 3.75 minutes\nLat =  38.639557\nLon = -123.480446  File created:  15:46 MAY  2,\'91\ndepth = 90m  Mag.var =  16.000000\n#  Variable     Units        Codes Depth   Inst.   Minimum   Maximum\n-- ------------ ------------ ----- ------- ------ --------- ---------\n 1 TIME         SECONDS      T     \n 2 TEMPERATURE  DEG C        R       80.00 V-516      8.793    11.170\n 3 ROTOR SPEED  CM/S         R       80.00 V-516      2.321    44.066\n 4 ATTENUATION  1/M          R       80.00            0.208    10.419\n---------------------------------------------------------------------\n Comments:                                                      U_MOVFIL\n  STRESS C3  V0=VMAX=4.781  .95* V(AIR) = 4.545\n VARIABLES LISTED IN ORDER SHOWN ABOVE\n";
}