netcdf ocean-time-series/Stellwagen/STRESS/3291-A.cdf {
  dimensions:
    time = 31776;
    depth = 1;
    lat = 1;
    lon = 1;
  variables:
    int time(time=31776);
      :FORTRAN_format = "F10.2";
      :units = "True Julian Day";
      :type = "EVEN";
      :epic_code = 624; // int

    int time2(time=31776);
      :FORTRAN_format = "F10.2";
      :units = "msec since 0:00 GMT";
      :type = "EVEN";
      :epic_code = 624; // int

    float depth(depth=1);
      :FORTRAN_format = "F10.2";
      :units = "m";
      :type = "EVEN";
      :epic_code = 3; // int

    float lat(lat=1);
      :FORTRAN_format = "F10.2";
      :units = "degrees_north";
      :type = "EVEN";
      :epic_code = 500; // int

    float lon(lon=1);
      :FORTRAN_format = "F10.2";
      :units = "degrees_east";
      :type = "EVEN";
      :epic_code = 502; // int

    float upr_4001(time=31776, depth=1, lat=1, lon=1);
      :name = "upr";
      :long_name = "UPPER ROTOR SPEED     ";
      :generic_name = "rotor";
      :FORTRAN_format = "f10.3";
      :units = "cm/s";
      :epic_code = 4001; // int
      :code = "R";
      :sensor_depth = 31.0f; // float
      :serial_number = "V-140";
      :minimum = 5.971f; // float
      :maximum = 45.461f; // float
      :valid_range = 0.0f, 1000.0f; // float

    float rot_4005(time=31776, depth=1, lat=1, lon=1);
      :name = "rot";
      :long_name = "ROTOR COUNTS             ";
      :generic_name = "rotor";
      :FORTRAN_format = "i10";
      :units = "counts";
      :epic_code = 4005; // int
      :code = "I";
      :sensor_depth = 31.0f; // float
      :serial_number = "V-140";
      :minimum = 0.0f; // float
      :maximum = 0.0f; // float
      :valid_range = -6000.0f, 6000.0f; // float

    float T_20(time=31776, depth=1, lat=1, lon=1);
      :name = "T";
      :long_name = "TEMPERATURE (C)          ";
      :generic_name = "temp";
      :FORTRAN_format = "f10.2";
      :units = "C";
      :epic_code = 20; // int
      :code = "R";
      :sensor_depth = 31.0f; // float
      :serial_number = "";
      :minimum = 8.34216f; // float
      :maximum = 10.6811f; // float
      :valid_range = 0.0f, 100.0f; // float

  // global attributes:
  :CREATION_DATE = "09:23 25-APR-97";
  :INST_TYPE = "V-140 ";
  :DATA_TYPE = "TIME";
  :DATA_SUBTYPE = "";
  :DATA_ORIGIN = "USGS/WHFC";
  :COORD_SYSTEM = "GEOGRAPHICAL";
  :WATER_MASS = "?";
  :EXPERIMENT = "?";
  :PROJECT = "?";
  :MOORING = "3291";
  :DELTA_T = "3.75 minutes\r\n";
  :COMPOSITE = 0; // int
  :DATA_CMNT = " STRESS NEAR SHORE. NO P0, P30; THERMISTOR CONSTANTS WRONG. E.S.T.\r\n";
  :POS_CONST = 0; // int
  :DEPTH_CONST = 0; // int
  :WATER_DEPTH = 51; // int
  :DESCRIPT = "?";
  :DRIFTER = 0; // int
  :VAR_DESC = "u v   ";
  :FILL_FLAG = 0; // int
  :VAR_FILL = "";
  :magnetic_variation(deg) = 15.0f; // float
  :title = "Current meter archive data - Butman et al, Oct.  1992";
  :start_time = "05-Dec-1988 22:31:52";
  :stop_time = "26-Feb-1989 16:28:07";
  :cycles = 31776; // int
  :days = 82; // int
  :latitude = 38.63711f; // float
  :longitude = -123.42689f; // float
  :history = "Original file creation date was 10:44 MAY  3,\'89\r\nConverted to EPIC/NetCDF Fri Dec  6 16:07:01 1996\n\nOriginal ascii file was a3291x01.ascChanged epic code 4020 to 4001 on Thu Apr 24 18:19:21 1997\nChanged epic code 5002 to 4005 on Thu Apr 24 18:19:21 1997\nChanged epic code 20 to 20 on Thu Apr 24 18:19:21 1997\n";
  :summary = "3291-A         start time =  5 Dec 1988  17:31:52  cycles = 31776\n               stop  time = 26 Feb 1989  11:28:07  # days = 82\nExpt. = \'USGS\'  sampling interval = 3.75 minutes\nLat =  38.637112\nLon = -123.426888  File created:  10:44 MAY  3,\'89\ndepth = 51m  Mag.var =  15.000000\n#  Variable     Units        Codes Depth   Inst.   Minimum   Maximum\n-- ------------ ------------ ----- ------- ------ --------- ---------\n 1 TIME         SECONDS      T     \n 2 ROTOR_SPEED  CM/S         R       31.00 V-140      5.971    45.461\n 3 ROTOR_COUNT  COUNT        I       31.00 V-140    198.000  2223.000\n 4 TEMPERATURE  DEG C        R       31.00            8.342    10.681\n---------------------------------------------------------------------\n Comments:                                                      REDUCE\n STRESS NEAR SHORE. NO P0, P30; THERMISTOR CONSTANTS WRONG. E.S.T.\n VARIABLES LISTED IN ORDER SHOWN ABOVE\n";
}