netcdf ocean-time-series/Stellwagen/DIAMONDSHOALS/8545advs-calq.nc {
  dimensions:
    time = UNLIMITED;   // (2832 currently)
    depth = 1;
    lon = 1;
    lat = 1;
  variables:
    float burst(time=2832);
      :units = "count";
      :name = "burst";
      :generic_name = "record";
      :epic_code = 1207; // int
      :long_name = "Burst Number";
      :_FillValue = 1.0E35f; // float

    int time(time=2832);
      :FORTRAN_format = "F10.2";
      :units = "True Julian Day";
      :type = "EVEN";
      :name = "time";
      :generic_name = "time";
      :epic_code = 624; // int
      :comment = "UT Julian days that begin at midnight; 1968-05-23 = 2440000";
      :comment1 = "time, taken from burst data, fixed at center of burst";

    int time2(time=2832);
      :FORTRAN_format = "F10.2";
      :generic_name = "time";
      :name = "time2";
      :epic_code = 624; // int
      :units = "msec since 0:00 GMT";
      :type = "EVEN";

    float depth(depth=1);
      :FORTRAN_format = "F10.2";
      :units = "m";
      :name = "depth";
      :type = "EVEN";
      :generic_name = "depth";
      :epic_code = 3; // int
      :long_name = "DEPTH (m)";
      :sample_volume_offset = 18.0; // double
      :transducer_offset_from_bottom = 0.56; // double

    float lon(lon=1);
      :FORTRAN_format = "f10.4";
      :units = "degree_east";
      :type = "EVEN";
      :epic_code = 502; // int
      :name = "LON";
      :long_name = "LONGITUDE";
      :generic_name = "lon";

    float lat(lat=1);
      :FORTRAN_format = "F10.2";
      :units = "degree_north";
      :type = "EVEN";
      :epic_code = 500; // int
      :name = "LAT";
      :long_name = "LATITUDE";
      :generic_name = "lat";
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float u_1205(time=2832, depth=1, lat=1, lon=1);
      :epic_code = 1205; // int
      :name = "u";
      :long_name = "Mean Eastward Velocity";
      :generic_name = "u";
      :units = "cm/s";
      :FORTRAN_format = " ";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :sample_volume_offset = 18.0; // double
      :serial = "B372B";
      :minimum = -11.1553755f; // float
      :maximum = 27.979656f; // float
      :valid_range = -1000.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float v_1206(time=2832, depth=1, lat=1, lon=1);
      :epic_code = 1206; // int
      :name = "v";
      :long_name = "Mean Northward Velocity";
      :generic_name = "v";
      :units = "cm/s";
      :FORTRAN_format = " ";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :sample_volume_offset = 18.0; // double
      :serial = "B372B";
      :minimum = -75.26353f; // float
      :maximum = 38.447582f; // float
      :valid_range = -1000.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float w_1204(time=2832, depth=1, lat=1, lon=1);
      :epic_code = 1204; // int
      :name = "w";
      :long_name = "Mean Vertical Velocity";
      :generic_name = "w";
      :units = "cm/s";
      :FORTRAN_format = " ";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :sample_volume_offset = 18.0; // double
      :serial = "B372B";
      :minimum = -9.6294f; // float
      :maximum = 2.633994f; // float
      :valid_range = -1000.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float USTD_4097(time=2832, depth=1, lat=1, lon=1);
      :epic_code = 4097; // int
      :name = "USTD";
      :long_name = "Std. Dev. of east component";
      :generic_name = "ustd";
      :units = "cm s-1";
      :FORTRAN_format = "f8.2";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 3.306352f; // float
      :maximum = 48.546017f; // float
      :valid_range = -1000.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float VSTD_4098(time=2832, depth=1, lat=1, lon=1);
      :epic_code = 4098; // int
      :name = "VSTD";
      :long_name = "Std. Dev. of north component";
      :generic_name = "vstd";
      :units = "cm s-1";
      :FORTRAN_format = "f8.2";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 3.6902606f; // float
      :maximum = 34.175594f; // float
      :valid_range = -1000.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float WSTD_4099(time=2832, depth=1, lat=1, lon=1);
      :epic_code = 4099; // int
      :name = "WSTD";
      :long_name = "Std. Dev. of upward component";
      :generic_name = "wstd";
      :units = "cm s-1";
      :FORTRAN_format = "f8.2";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 0.5088981f; // float
      :maximum = 5.729185f; // float
      :valid_range = -1000.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float u_1205min(time=2832, depth=1, lat=1, lon=1);
      :name = "u_min";
      :long_name = "Minimum Eastward Velocity";
      :generic_name = "u_min";
      :units = "cm/s";
      :FORTRAN_format = " ";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = -188.53915f; // float
      :maximum = 2.0647333f; // float
      :valid_range = -1000.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float v_1206min(time=2832, depth=1, lat=1, lon=1);
      :name = "v_min";
      :long_name = "Minimum Northward Velocity";
      :generic_name = "v_min";
      :units = "cm/s";
      :FORTRAN_format = " ";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = -209.4357f; // float
      :maximum = 2.019713f; // float
      :valid_range = -1000.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float w_1204min(time=2832, depth=1, lat=1, lon=1);
      :name = "w_min";
      :long_name = "Minimum Vertical Velocity";
      :generic_name = "w_min";
      :units = "cm/s";
      :FORTRAN_format = " ";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = -45.001587f; // float
      :maximum = -2.1217027f; // float
      :valid_range = -1000.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float u_1205max(time=2832, depth=1, lat=1, lon=1);
      :name = "u_max";
      :long_name = "Maximum Eastward Velocity";
      :generic_name = "u_max";
      :units = "cm/s";
      :FORTRAN_format = " ";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 10.995798f; // float
      :maximum = 208.6739f; // float
      :valid_range = -1000.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float v_1206max(time=2832, depth=1, lat=1, lon=1);
      :name = "v_max";
      :long_name = "Maximum Northward Velocity";
      :generic_name = "v_max";
      :units = "cm/s";
      :FORTRAN_format = " ";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = -8.19498f; // float
      :maximum = 166.92433f; // float
      :valid_range = -1000.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float w_1204max(time=2832, depth=1, lat=1, lon=1);
      :name = "w_max";
      :long_name = "Maximum Vertical Velocity";
      :generic_name = "w_max";
      :units = "cm/s";
      :FORTRAN_format = " ";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 1.2376707f; // float
      :maximum = 30.389534f; // float
      :valid_range = -1000.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float CS_300(time=2832, depth=1, lat=1, lon=1);
      :epic_code = 300; // int
      :name = "CS";
      :long_name = "CURRENT SPEED (CM/S)      ";
      :generic_name = "vspd";
      :units = "cm s-1";
      :FORTRAN_format = "f8.2";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 0.21251465f; // float
      :maximum = 75.35266f; // float
      :valid_range = 0.0f, 1000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float CD_310(time=2832, depth=1, lat=1, lon=1);
      :epic_code = 310; // int
      :name = "CD";
      :long_name = "CURRENT DIRECTION (T)     ";
      :generic_name = "vdir";
      :units = "degrees";
      :FORTRAN_format = "f8.2";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 0.047268208f; // float
      :maximum = 359.80173f; // float
      :valid_range = 0.0f, 360.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float AGC1_1221(time=2832, depth=1, lat=1, lon=1);
      :name = "AGC1";
      :long_name = "Mean Echo Intensity (AGC) Beam 1";
      :generic_name = "AGC";
      :FORTRAN_format = " ";
      :units = "counts";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :valid_range = 0.0, 14089.81; // double
      :NOTE = "dB = counts x 0.43";
      :_FillValue = 1.0E35f; // float
      :minimum = 41.521427f; // float
      :maximum = 227.24048f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float AGC2_1222(time=2832, depth=1, lat=1, lon=1);
      :name = "AGC2";
      :long_name = "Mean Echo Intensity (AGC) Beam 2";
      :generic_name = "AGC";
      :FORTRAN_format = " ";
      :units = "counts";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :valid_range = 0.0, 14089.81; // double
      :NOTE = "dB = counts x 0.43";
      :_FillValue = 1.0E35f; // float
      :minimum = 126.18357f; // float
      :maximum = 229.34036f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float AGC3_1223(time=2832, depth=1, lat=1, lon=1);
      :name = "AGC3";
      :long_name = "Mean Echo Intensity (AGC) Beam 3";
      :generic_name = "AGC";
      :FORTRAN_format = " ";
      :units = "counts";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :valid_range = 0.0, 14089.81; // double
      :NOTE = "dB = counts x 0.43";
      :_FillValue = 1.0E35f; // float
      :minimum = 119.47191f; // float
      :maximum = 229.14572f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float cor1_1285(time=2832, depth=1, lat=1, lon=1);
      :name = "cor1";
      :long_name = " Beam 1 Correlation";
      :generic_name = "Cor";
      :FORTRAN_format = " ";
      :units = "percent";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :valid_range = 0.0, 100.0; // double
      :_FillValue = 1.0E35f; // float
      :minimum = 12.582857f; // float
      :maximum = 99.016426f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float cor2_1286(time=2832, depth=1, lat=1, lon=1);
      :name = "cor2";
      :long_name = " Beam 2 Correlation";
      :generic_name = "Cor";
      :FORTRAN_format = " ";
      :units = "percent";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :valid_range = 0.0, 100.0; // double
      :_FillValue = 1.0E35f; // float
      :minimum = 64.1206f; // float
      :maximum = 99.006546f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float cor3_1287(time=2832, depth=1, lat=1, lon=1);
      :name = "cor3";
      :long_name = " Beam 3 Correlation";
      :generic_name = "Cor";
      :FORTRAN_format = " ";
      :units = "percent";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :valid_range = 0.0, 100.0; // double
      :_FillValue = 1.0E35f; // float
      :minimum = 66.31953f; // float
      :maximum = 99.020355f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float P_4023(time=2832, lat=1, lon=1);
      :epic_code = 4023; // int
      :name = "P";
      :long_name = "AVERAGE BURST PRESSURE   ";
      :generic_name = "pres";
      :units = "mbar";
      :FORTRAN_format = "f10.3";
      :sensor_type = "ParosFreq";
      :sensor_depth = 13.091840004768372; // double
      :initial_sensor_height = 1.6299999952316284; // double
      :serial = "P70390";
      :minimum = 2288.2693f; // float
      :maximum = 2700.483f; // float
      :valid_range = 0.0f, 100000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float SDP_850(time=2832, lat=1, lon=1);
      :epic_code = 850; // int
      :name = "SDP";
      :long_name = "STAND. DEV. (PRESS)     ";
      :generic_name = "pres";
      :units = "mbar";
      :sensor_type = "ParosFreq";
      :sensor_depth = 13.091840004768372; // double
      :initial_sensor_height = 1.6299999952316284; // double
      :serial = "P70390";
      :minimum = 4.7676935f; // float
      :maximum = 73.301414f; // float
      :valid_range = 0.0f, 5000.0f; // float
      :cal_serialnum = "P70390";
      :cal_F0 = 1.2E7f; // float
      :cal_U0 = 0.0f; // float
      :cal_Y = 0.0f, 0.0f, 0.0f, 0.0f; // float
      :cal_C = 606.2662f, 0.00158605f, -5.55501E-5f, 0.0f; // float
      :cal_D = 0.024865f, 0.0f, 0.0f, 0.0f; // float
      :cal_T = 27.75208f, -7.33351E-5f, 1.06256E-6f, 9.14717E-10f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float Tx_1211(time=2832, depth=1, lat=1, lon=1);
      :name = "Tx";
      :long_name = "Transducer Temp.";
      :generic_name = "temp";
      :units = "degrees C";
      :epic_code = 1211; // int
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 5.673588f; // float
      :maximum = 21.283648f; // float
      :valid_range = -5.0f, 40.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float NEP1_56(time=2832, lat=1, lon=1);
      :cal_gain = 1.0f; // float
      :cal_coef = -9.1178f, 1495.226f; // float
      :cal_manufacturer = "Wetlabs";
      :cal_model = "OBS 3+ High Output";
      :cal_units = "NTU";
      :name = "nep1";
      :long_name = "BACKSCATTER INTENSITY 1";
      :units = "v";
      :generic_name = "nephelometer";
      :epic_code = 56; // int
      :sensor_type = "nephelometer";
      :sensor_depth = 14.481840005364418; // double
      :initial_sensor_height = 0.23999999463558197; // double
      :serial = "OBS7409";
      :minimum = 0.0040775845f; // float
      :maximum = 3.0998156f; // float
      :valid_range = 0.0f, 5.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float Sed1_981(time=2832, lat=1, lon=1);
      :cal_gain = 1.0f; // float
      :cal_coef = -9.1178f, 1495.226f; // float
      :cal_manufacturer = "Wetlabs";
      :cal_model = "OBS 3+ High Output";
      :cal_units = "NTU";
      :name = "sed1";
      :long_name = "Sediment concentration 1";
      :generic_name = "sed";
      :epic_code = 981; // int
      :units = "g/l";
      :sensor_type = "nephelometer";
      :sensor_depth = 14.481840005364418; // double
      :initial_sensor_height = 0.23999999463558197; // double
      :serial = "OBS7409";
      :minimum = 6.09691f; // float
      :maximum = 4635.3066f; // float
      :valid_range = 0.0f, 10000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float vrange(time=2832, depth=1, lat=1, lon=1);
      :name = "vrange";
      :long_name = "Volume Range to Boundary";
      :generic_name = "vrange";
      :epic_code = 0; // int
      :units = "m";
      :FORTRAN_format = " ";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 0.0145f; // float
      :maximum = 0.3615f; // float
      :valid_range = 0.0f, 200.0f; // float
      :NOTE = "edited by ecorr";
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float brange(time=2832, depth=1, lat=1, lon=1);
      :name = "brange";
      :long_name = "Sensor Range to Boundary";
      :generic_name = "brange";
      :epic_code = 0; // int
      :units = "m";
      :FORTRAN_format = " ";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 0.1792f; // float
      :maximum = 0.54209995f; // float
      :valid_range = 0.0f, 200.0f; // float
      :NOTE = "edited by ecorr";
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float Hdg_1215(time=2832, depth=1, lat=1, lon=1);
      :name = "Hdg";
      :long_name = "INST Heading             ";
      :generic_name = "hdg";
      :epic_code = 1215; // int
      :units = "degrees";
      :FORTRAN_format = "f10.2";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 222.6f; // float
      :maximum = 349.7f; // float
      :valid_range = 0.0f, 360.0f; // float
      :NOTE = "Median of burst heading data";
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float Ptch_1216(time=2832, depth=1, lat=1, lon=1);
      :name = "Ptch";
      :long_name = "INST Pitch             ";
      :generic_name = "ptch";
      :epic_code = 1216; // int
      :units = "degrees";
      :FORTRAN_format = "f10.2";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = -50.0f; // float
      :maximum = 3.0f; // float
      :valid_range = -180.0f, 180.0f; // float
      :NOTE = "Median of burst pitch data";
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float Roll_1217(time=2832, depth=1, lat=1, lon=1);
      :name = "Roll";
      :long_name = "INST Roll             ";
      :generic_name = "roll";
      :epic_code = 1217; // int
      :units = "degrees";
      :FORTRAN_format = "f10.2";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = -50.0f; // float
      :maximum = 1.3f; // float
      :valid_range = -180.0f, 180.0f; // float
      :NOTE = "Median of burst roll data";
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float HSD_1218(time=2832, depth=1, lat=1, lon=1);
      :name = "HSD";
      :long_name = "Heading Std. Dev.        ";
      :generic_name = "hdg";
      :epic_code = 1218; // int
      :units = "degrees";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 0.0f; // float
      :maximum = 1.5416355f; // float
      :valid_range = 0.0f, 360.0f; // float
      :NOTE = "Calculated from burst heading data";
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float PSD_1219(time=2832, depth=1, lat=1, lon=1);
      :name = "PSD";
      :long_name = "Pitch Std. Dev.          ";
      :generic_name = "ptch";
      :epic_code = 1219; // int
      :units = "degrees";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 0.0f; // float
      :maximum = 14.504684f; // float
      :valid_range = -180.0f, 180.0f; // float
      :NOTE = "Calculated from burst pitch data";
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float RSD_1220(time=2832, depth=1, lat=1, lon=1);
      :name = "RSD";
      :long_name = "Roll Std. Dev.             ";
      :generic_name = "roll";
      :epic_code = 1220; // int
      :units = "degrees";
      :sensor_type = "Sontek ADV";
      :sensor_depth = 14.16184; // double
      :initial_sensor_height = 0.56; // double
      :serial = "B372B";
      :minimum = 0.0f; // float
      :maximum = 15.145475f; // float
      :valid_range = -180.0f, 180.0f; // float
      :NOTE = "Calculated from burst roll data";
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

  // global attributes:
  :MOORING = "854_";
  :WATER_DEPTH = 14.72184; // double
  :latitude = 35.17863; // double
  :longitude = -75.42292; // double
  :magnetic_variation = -10.5; // double
  :INST_TYPE = "Sontek ADV";
  :DATA_ORIGIN = "USGS WHSC Sed Trans Group";
  :EXPERIMENT = "Carolinas Coastal Change Processes Project";
  :PROJECT = "USGS Coastal Marine Geology Program";
  :DESCRIPT = "Sontek ADV calibrated data statistics file";
  :Conventions = "PMEL/EPIC";
  :DATA_SUBTYPE = " ";
  :WATER_MASS = "?";
  :COMPOSITE = 0; // int
  :POS_CONST = 0; // int
  :FILL_FLAG = 1; // int
  :DEPTH_CONST = 1; // int
  :DATA_CMNT = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care: tripod tipped over on 4/17 0000h.  velocity data is NG after that so was replaced with fill_value- other data after that is likely at a different depth so use with care";
  :VAR_FILL = 1.0E35f; // float
  :Deployment_date = "12-Jan-2009";
  :Recovery_date = "11-May-2009";
  :ADVProbeHeight = 0.56; // double
  :ADVSampleVolumeOffset = 18.0; // double
  :cpuSoftWareVerNum = 8.5; // double
  :dspSoftWareVerNum = 4.1000000000000005; // double
  :ADVType = "10MHz_5cm";
  :SensorOrientation = "down";
  :CompassInstalled = "Yes";
  :RecorderInstalled = "Yes";
  :TempInstalled = "Yes";
  :PressInstalled = "No";
  :PressScale = 0.0; // double
  :PressOffset = 0.0; // double
  :CompassOffset = 0.0; // double
  :PressFreqOffset = 21.0; // double
  :ExtSensorInstalled = "1_OBS";
  :ExtPressInstalled = "ParosFreq";
  :PressScale_2 = 0.0; // double
  :CTDInstalled = "None";
  :ADVProbeConfig = "Ocean Probe";
  :ADVProbeSerial = "B372B";
  :ADVProbeNbeams = 3.0; // double
  :ADVProbeSampInterval = 3.0; // double
  :ADVProbeXmtRecDist = 0.09000000357627869; // double
  :ADVProbeSamplingVolumeOffset = 18.0; // double
  :ADVDeploymentSetupSyncMode = "Start";
  :ADVDeploymentSetupSampleRate = 8.0; // double
  :ADVDeploymentSetupBurstInterval = 3600.0; // double
  :ADVDeploymentSetupSamplesPerBurst = 8400.0; // double
  :ADVDeploymentSetupDeploymentName = "8545";
  :ADVDeploymentSetupBeginDeployment = 9.0, 1.0, 2009.0, 0.0, 51.0, 15.0, 94.0; // double
  :ADVDeploymentSetupADRComments = "Ch1 OBS3+ S7409Paros 70390Slave to G340 yellow";
  :ADVDeploymentSetupRecordedDataFlags = 1.0, 1.0, 1.0, 0.0, 1.0, 1.0, 1.0, 0.0; // double
  :CREATION_DATE = "02-Sep-2010 13:24:12";
  :COORD_SYSTEM = "GEOGRAPHICAL+SAMPLE";
  :DATA_TYPE = "TIME+SAMPLE";
  :history = "Tue Sep  7 13:53:03 2010: ncrcat All_A8545advs-cal.nc All_B8545advs-cal.nc 8545advs-cal.nc\nconverted by adv2nc; SVN $Revision: 1849 $: cleanhydra SVN $Revision: 1921 $ applied  thumbfinger with nsd = 10.000000: Converted to netCDF by adr2cdf v1849; cleanhydra SVN $Revision: 1921 $ applied  fix_vbrange with min-max, std = 225.000000&; 2.800000e+000 ; cleanhydra SVN $Revision: 1921 $ applied  fix_vbrange with min-max, std = 50.000000(; 2.800000e+000 ";
  :DELTA_T = "3600";
  :VAR_DESC = "burst:u:v:w:USTD:VSTD:WSTD:u_min:v_min:w_min:u_max:v_max:w_max:CS:CD:AGC1:AGC2:AGC3:cor1:cor2:cor3:P:SDP:Tx:nep1:sed1:vrange:brange:Hdg:Ptch:Roll:HSD:PSD:RSD";
  :ADVCalcSampleVolumeOffset = 0.16450000000000004; // double
  :start_time = "13-Jan-2009 00:00:01";
  :stop_time = "10-May-2009 23:00:00";
  :nco_openmp_thread_number = 1; // int
  :note = "velocity data replaced with fillValue after tripod tipped over on April, 17, 0000 (burst 2353).  Other varaibles not changed";
}