netcdf ocean-time-series/Stellwagen/DIAMONDSHOALS/8543sc-a.nc {
  dimensions:
    time = UNLIMITED;   // (34003 currently)
    lat = 1;
    lon = 1;
    depth = 1;
  variables:
    int time(time=34003);
      :FORTRAN_format = "F10.2";
      :units = "True Julian Day";
      :type = "EVEN";
      :epic_code = 624; // int

    int time2(time=34003);
      :FORTRAN_format = "F10.2";
      :units = "msec since 0:00 GMT";
      :type = "EVEN";
      :epic_code = 624; // int

    float lat(lat=1);
      :FORTRAN_format = "F10.2";
      :units = "degrees_north";
      :type = "EVEN";
      :epic_code = 500; // int
      :datum = "NAD83";

    float lon(lon=1);
      :FORTRAN_format = "F10.2";
      :units = "degrees_east";
      :type = "EVEN";
      :epic_code = 502; // int
      :datum = "NAD83";

    float depth(depth=1);
      :FORTRAN_format = "F10.2";
      :units = "m";
      :type = "EVEN";
      :epic_code = 3; // int

    float T_28(time=34003, depth=1, lat=1, lon=1);
      :name = "T";
      :long_name = "TEMPERATURE (C)          ";
      :generic_name = "temp";
      :FORTRAN_format = "f10.2";
      :units = "C";
      :epic_code = 28; // int
      :sensor_depth = 13.07184f; // float
      :minimum = -0.257f; // float
      :maximum = 18.797f; // float
      :serial_number = "4250";
      :valid_range = 0.0f, 100.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";
      :initial_sensor_height = 0.0f; // float

    float C_51(time=34003, depth=1, lat=1, lon=1);
      :name = "C";
      :long_name = "CONDUCTIVITY             ";
      :generic_name = "con";
      :FORTRAN_format = "f10.3";
      :units = "S/m";
      :epic_code = 51; // int
      :sensor_depth = 13.07184f; // float
      :serial_number = "4250";
      :minimum = -5.2064f; // float
      :maximum = 29.7607f; // float
      :valid_range = 0.0f, 10.0f; // float
      :_FillValue = 1.0E35f; // float
      :initial_sensor_height = 0.0f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float S_41(time=34003, depth=1, lat=1, lon=1);
      :name = "S";
      :long_name = "SALINITY (PSU)           ";
      :generic_name = "sal";
      :FORTRAN_format = "f10.2";
      :units = "PSU";
      :epic_code = 41; // int
      :sensor_depth = 13.07184f; // float
      :minimum = -2.67E-4f; // float
      :maximum = 4.741134f; // float
      :valid_range = 0.0f, 40.0f; // float
      :_FillValue = 1.0E35f; // float
      :initial_sensor_height = 0.0f; // float
      :serial_number = "4250";
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float STH_71(time=34003, depth=1, lat=1, lon=1);
      :name = "STH";
      :long_name = "SIGMA-THETA (KG/M**3) ";
      :generic_name = "potden";
      :FORTRAN_format = "f10.2";
      :units = "KG/M**3";
      :epic_code = 71; // int
      :sensor_depth = 13.07184f; // float
      :minimum = 0.0f; // float
      :maximum = 35.9954f; // float
      :serial_number = "4250";
      :valid_range = 0.0f, 100.0f; // float
      :_FillValue = 1.0E35f; // float
      :initial_sensor_height = 0.0f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float TIM_625(time=34003, depth=1, lat=1, lon=1);
      :name = "TIM";
      :long_name = "SECONDS SINCE START";
      :generic_name = "time";
      :FORTRAN_format = " ";
      :units = "sec";
      :epic_code = 1; // int
      :sensor_depth = 13.07184f; // float
      :serial_number = "4250";
      :minimum = 32562.584f; // float
      :maximum = 505550.1f; // float
      :valid_range = 0.0f, 100000.0f; // float
      :_FillValue = 1.0E35f; // float
      :initial_sensor_height = 0.0f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";

    float P_1(time=34003, depth=1, lat=1, lon=1);
      :name = "P";
      :long_name = "PRESSURE (DB)          ";
      :generic_name = "depth";
      :FORTRAN_format = "f10.1";
      :units = "dbar";
      :epic_code = 1; // int
      :sensor_depth = 13.07184f; // float
      :minimum = 0.0f; // float
      :maximum = 0.0f; // float
      :serial_number = 4250.0; // double
      :valid_range = 0.0f, 10000.0f; // float
      :_FillValue = 1.0E35f; // float
      :comment = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care";
      :initial_sensor_height = 0.0f; // float

  // global attributes:
  :longitude = -75.42292f; // float
  :latitude = 35.17863f; // float
  :deployment_date = "12-Jan-2009";
  :recovery_date = "11-May-2009";
  :DELTA_T = "300";
  :WATER_DEPTH = 14.72184f; // float
  :inst_height = 1.65f; // float
  :DATA_CMNT = "tripod tipped over on 4/17 0000h.  Data after that is likely at a different depth, so should be used with care: tripod tipped over on 4/17 0000h.  velocity data is NG after that so was replaced with fill_value- other data after that is likely at a different depth so use with care";
  :magnetic_variation = -10.5f; // float
  :SciPi = "J.C. Warner";
  :EXPERIMENT = "Carolinas Coastal Change Processes Project";
  :DATA_SUBTYPE = "MOORED";
  :MOORING = "8543";
  :VAR_DESC = "T:C:S:STH:TIM:P:";
  :INST_TYPE = "Seabird SeaCat";
  :COMPOSITE = 0.0f; // float
  :POS_CONST = 0.0f; // float
  :DEPTH_CONST = 0.0f; // float
  :WATER_DEPTH_source = "shipboard echosounder";
  :WATER_DEPTH_datum = "none";
  :DRIFTER = 0.0f; // float
  :FILL_FLAG = 0.0f; // float
  :platform_type = "tripod";
  :VAR_FILL = 1.0E35f; // float
  :COORD_SYSTEM = "GEOGRAPHICAL";
  :history = "Trimmed using trunc_cdf,  SVN $Revision: 1630 $ to select records in the range 1130 to 35132.  :Converted from ascii to EPIC by asc2epic";
  :start_time = "12-Jan-2009 22:20:04";
  :stop_time = "10-May-2009 23:50:04";
  :elapsed_days = 131.0; // double
  :CREATION_DATE = "02-Sep-2010 14:06:58";
  :PROJECT = "USGS Coastal and Marine Geology Program";
  :DATA_TYPE = "TIME";
  :DATA_ORIGIN = "USGS WHSC Sed Trans Group";
  :DESCRIPTION = "North site with two tripods";
}