netcdf ocean-time-series/Stellwagen/CHINCOTEAGUE/10302Aysi-a.nc {
  dimensions:
    time = UNLIMITED;   // (5867 currently)
    lat = 1;
    lon = 1;
    depth = 1;
  variables:
    int time(time=5867);
      :long_name = "Time";
      :units = "True Julian Day";
      :type = "EVEN";
      :epic_code = 624.0; // double

    int time2(time=5867);
      :long_name = "Time2";
      :units = "msec since 00:00 GMT";
      :type = "EVEN";
      :epic_code = 624.0; // double

    double lat(lat=1);
      :units = "degrees_north";
      :long_name = "Latitude";
      :epic_code = 500.0; // double
      :datum = "NAD83";

    double lon(lon=1);
      :units = "degrees_east";
      :long_name = "Longitude";
      :epic_code = 502.0; // double
      :datum = "NAD83";

    double depth(depth=1);
      :positive = "down";
      :long_name = "Depth";
      :axis = "z";
      :units = "m";
      :epic_code = 3.0; // double

    double T_28(time=5867, lon=1, lat=1, depth=1);
      :long_name = "Temperature";
      :units = "C";
      :epic_code = 28.0; // double
      :Sensor_model_number = "6560";
      :sensor_depth = 1.6400000000000001; // double
      :height_depth_units = "m";
      :initial_sensor_height = 0.16; // double
      :minimum = 17.46; // double
      :maximum = 29.11; // double
      :serial_number = "627";
      :_FillValue = 1.0E35; // double
      :comment = "ITS-1990 Standard";

    double SpC_48(time=5867, lon=1, lat=1, depth=1);
      :long_name = "Specific conductance";
      :units = "mS/cm";
      :epic_code = 48.0; // double
      :Sensor_model_number = "6560";
      :sensor_depth = 1.6400000000000001; // double
      :height_depth_units = "m";
      :initial_sensor_height = 0.16; // double
      :minimum = 39.55760060280169; // double
      :maximum = 48.89902178486432; // double
      :serial_number = "627";
      :_FillValue = 1.0E35; // double
      :comment = "temperature compensated to 25C";
      :note = "apply linear drift/fouling correction; Use 15pt median filter technique on SpC_48 data to eliminate data where increases by > 1 units in a single time step.";

    double C_51(time=5867, lon=1, lat=1, depth=1);
      :long_name = "Conductivity";
      :units = "S/m";
      :epic_code = 51.0; // double
      :Sensor_model_number = "6560";
      :sensor_depth = 1.6400000000000001; // double
      :height_depth_units = "m";
      :initial_sensor_height = 0.16; // double
      :minimum = 3.7385578468086123; // double
      :maximum = 4.940515664561453; // double
      :serial_number = "627";
      :_FillValue = 1.0E35; // double
      :note = "apply linear drift/fouling correction; Use 15pt median filter technique on C_51 data to eliminate data where increases by > 0.1 units in a single time step.";
      :data_cmnt = "Drift/fouling correction applied";

    double S_40(time=5867, lon=1, lat=1, depth=1);
      :long_name = "Salinity";
      :units = "PPT";
      :epic_code = 40.0; // double
      :Sensor_model_number = "6560";
      :sensor_depth = 1.6400000000000001; // double
      :height_depth_units = "m";
      :initial_sensor_height = 0.16; // double
      :minimum = 25.048527976209485; // double
      :maximum = 31.002403075912248; // double
      :serial_number = "627";
      :_FillValue = 1.0E35; // double
      :note = "Re-calculated salinity based on drift/fouling corrected Cond and corrected pressure data.";
      :data_cmnt = "Drift/fouling correction applied";

    double BPR_1301(time=5867, lon=1, lat=1, depth=1);
      :long_name = "Pressure";
      :units = "Pounds per square inch absolute";
      :epic_code = 1301.0; // double
      :sensor_depth = 1.6400000000000001; // double
      :height_depth_units = "m";
      :initial_sensor_height = 0.16; // double
      :minimum = 17.271; // double
      :maximum = 18.154; // double
      :serial_number = "627";
      :_FillValue = 1.0E35; // double

    double D_3(time=5867, lon=1, lat=1, depth=1);
      :long_name = "Depth";
      :units = "m";
      :epic_code = 3.0; // double
      :sensor_depth = 1.6400000000000001; // double
      :height_depth_units = "m";
      :initial_sensor_height = 0.16; // double
      :minimum = 1.383; // double
      :maximum = 1.991; // double
      :serial_number = "627";
      :_FillValue = 1.0E35; // double
      :positive = "down";
      :axis = "z";

    double Turb(time=5867, lon=1, lat=1, depth=1);
      :long_name = "Turbidity";
      :units = "Nephelometric turbity units (NTU)";
      :epic_code = "";
      :Sensor_model_number = "6136";
      :sensor_depth = 1.6400000000000001; // double
      :height_depth_units = "m";
      :initial_sensor_height = 0.16; // double
      :minimum = 1.0; // double
      :maximum = 42.1; // double
      :serial_number = "627";
      :_FillValue = 1.0E35; // double
      :comment = "wiped turbidity probe";
      :note = "Recursively filtered  Turb data to eliminate data where increases by >  100 units in a single time step, Replace data at end of deployment, after 19-Sep-2014 00:30:51 , where fouling suspected with fill value";

    double OST_62(time=5867, lon=1, lat=1, depth=1);
      :long_name = "Oxygen percent saturation";
      :units = "%";
      :epic_code = 62.0; // double
      :Sensor_model_number = "6150";
      :sensor_depth = 1.6400000000000001; // double
      :height_depth_units = "m";
      :initial_sensor_height = 0.16; // double
      :minimum = 55.5; // double
      :maximum = 145.9; // double
      :serial_number = "627";
      :_FillValue = 1.0E35; // double
      :comment = "ROX Optical DO sensor, wiped";

    double DO(time=5867, lon=1, lat=1, depth=1);
      :long_name = "Dissolved oxygen";
      :units = "mg/L";
      :epic_code = "";
      :Sensor_model_number = "6150";
      :sensor_depth = 1.6400000000000001; // double
      :height_depth_units = "m";
      :initial_sensor_height = 0.16; // double
      :minimum = 3.8; // double
      :maximum = 10.27; // double
      :serial_number = "627";
      :_FillValue = 1.0E35; // double
      :comment = "ROX Optical DO sensor, wiped";

    double Bat_106(time=5867, lon=1, lat=1, depth=1);
      :long_name = "Battery voltage (v)";
      :units = "V";
      :epic_code = 106.0; // double
      :sensor_depth = 1.6400000000000001; // double
      :height_depth_units = "m";
      :initial_sensor_height = 0.16; // double
      :minimum = 10.8; // double
      :maximum = 12.5; // double
      :serial_number = "627";
      :_FillValue = 1.0E35; // double

    double dn(time=5867);
      :long_name = "Matlab datenum";
      :units = "Days since Jan-0-0000 00:00:00";

    double P_1ac(time=5867, lon=1, lat=1, depth=1);
      :name = "pressure (corrected for atmospheric)";
      :long_name = "pressure (corrected for atmospheric)";
      :standard_name = "sea_water_pressure_due_to_sea_water";
      :units = "dbar";
      :initial_instrument_height = 0.16; // double
      :minimum = 1.2437359999999984; // double
      :maximum = 2.006421833341081; // double
      :_FillValue = 1.0E35; // double
      :note = "Corrected for variations in atmospheric pressure using record from WAHV2 and weather station at mooring 1031";

  // global attributes:
  :SciPi = "N. Ganju";
  :PROJECT = "USGS Coastal Marine Geology Program";
  :EXPERIMENT = "Estuarine physical response";
  :DESCRIPTION = "site CB12, Sinepuxent Channel";
  :DATA_SUBTYPE = "MOORED";
  :DATA_ORIGIN = "USGS WHCMSC Sed Trans Group";
  :COORD_SYSTEM = "GEOGRAPHIC";
  :Conventions = "PMEL/EPIC";
  :MOORING = "1030";
  :WATER_DEPTH = 1.8; // double
  :WATER_DEPTH_NOTE = "(meters), nominal depth";
  :latitude = 38.25915; // double
  :longitude = -75.13968; // double
  :magnetic_variation = -11.8; // double
  :Deployment_date = "14-Aug-2014";
  :Recovery_date = "14-Oct-2014";
  :DATA_CMNT = " ";
  :platform_type = "Fiberglass bottom lander";
  :DRIFTER = 0.0; // double
  :POS_CONST = 0.0; // double
  :DEPTH_CONST = 0.0; // double
  :WATER_MASS = "Chincoteague Bay, VA/MD";
  :VAR_FILL = 1.0E35; // double
  :institution = "United States Geological Survey, Woods Hole Coastal and Marine Science Center";
  :institution_url = "http://woodshole.er.usgs.gov";
  :initial_instrument_height = 0.16; // double
  :DELTA_T = 900.0; // double
  :INST_TYPE = "YSI 6600V2-4";
  :serial_number = "627";
  :FILL_FLAG = 1.0; // double
  :note = "";
  :VAR_DESC = "Temp C:SpCond mS/cm:Cond mS/cm:Sal ppt:Press psia:Depth meters:Turbid+ NTU:ODO sat %:ODO mg/L:Battery volts";
  :COMPOSITE = 0.0; // double
  :CREATION_DATE = "23-Mar-2016 12:46:26";
  :start_time = "14-Aug-2014 16:15:50";
  :stop_time = "14-Oct-2014 18:45:51";
  :history = "Corrected conductivity data for drift/fouling and recalculated salinity with corrected CT data, Replace suspected bad data with fill value, Trimmed using trunc_cdfNative,  SVN $Revision: 3342 $ to select records in the range 354 to 6220.  :created using ysi2ncNative in Matlab 7.14.0.739 (R2012a).";
}